| STAHLWILLE >> Special automotive tools >> VW/Audi |
| No Picture |
Tool set for Volkswagen |
1000N |
93 tools |
| No Picture |
Body tool set for Volkswagen |
1020N |
56 tools |
| Socket |
1007* |
long, bi-hexagon, AS-drive, relief-turned inside, size 22 mm, 1/2" Inside Square -drive, for diesel injector |
| INHEX socket |
1054-13 |
for hexagon socket head screws, size 13 mm, length, 70 mm, 1/2" Inside Square -drive, for use on brass air-cooled injector nozzles. |
| Single ended spanner |
1023* |
size 13 mm, for mounting screws on injection pump, adjusting injector timing, changing, toothed belt on 1.6 l 4-cylinder diesel. |
| Valve sealing ring pliers |
11063 |
for removing valve stem seals on water cooled engines. |
| Valve spring mounting tool |
12108 |
length 300 mm. |
| Valve adjustment tool |
12960* |
for use with clearance disc pliers No 12956,on all 4-cylinder engines with bucket tappets until model year 1982. |
| Valve clearance disc pliers |
12956* |
reinforced tips with milled profile for better grasp of discs, for exchange of discs. |
| Socket |
1051-19* |
bi-hexagon, AS-drive, size 19 mm, 1/2" Inside Square -drive, for use on frontsuspension. |
| No Picture |
Socket |
1051-21* |
size 21 mm. |
| No Picture |
Socket |
1051-22* |
size 22 mm. |
| Hexagon key wrench |
10765-7 |
size 7 mm (for use with No 1051-19, No 1051-22), for use as counter stay on front suspension. |
| Brass punch |
12495 |
Ø 20 mm, length 200 mm, for use on bushes bearing rings, steering pivot pin. |
| Spark plug socket |
1040* |
hexagon, with rubber insert, size 20.8 mm-13/16", 1/2" Inside Square -drive |
| Tubular spark plug spanner |
1042 |
size 16 mm, length 270 mm, 3/8" Inside Square -drive. |
| Brake adjusting lever |
1029* |
for drum brakes. |
| INHEX socket |
1054KK-5 |
with ball-point hexagon, size 5 mm, length 238 mm, 1/2" Inside Square -drive,for use on socket head screws with difficult access up to an angle of 25°, size 5 mm for use on sump screws of 5 ... more |
| INHEX socket |
1054KK-8 |
size 8 mm, length 238 mm. |
| Accessory set for SERVICE-MANOSKOP No 730/2 |
1060/4 |
for controlled torque tightening of screws on automatic transmission.Content:No 736/10 Bit-holder insert tool with 5/16" inside hexagon,No 1322 Bit for hexagon socket head screws, size 5 mm,No ... more |
| SERVICE-MANOSKOPtorque wrench |
730/2 |
capacity 4-20 N m. |
| Square drive insert tool |
734/5 |
3/8" Inside Square -drive, for use with SERVICE-MANOSKOP torque wrench No 730/2. |
| Pin wrench |
12717 |
offset, distance between pins 18 mm, pin dia. Diameter in mm 2.9 mm, length 140 mm, for ring nut of tension pulley on 1.6 l diesel. |
| Standard-MANOSKOPtorque wrench |
720NF/80 |
capacity 160-800 N m, 3/4" Inside Square -drive |
| SERVICE-MANOSKOPtorque wrench |
730/5 |
capacity 5-50 N m, for general service work. |
| Ring insert tool |
732/10-13 |
size 13 mm, for use withSERVICE-MANOSKOP torque wrench No 730/5. |
| Square drive insert tool |
734/10 |
1/2" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/5. |
| Ratchet insert tool |
735/10 |
reversible, 1/2" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/5. |
| SERVICE-MANOSKOPtorque wrench |
730/20 |
capacity 40-200 N m. |
| Square drive insert tool |
734/20 |
1/2" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/20. |
| Ratchet insert tool |
735/20 |
reversible, 1/2" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/20. |
| SERVICE-MANOSKOPtorque wrench |
730/40 |
capacity 80-400 N m. |
| Square drive insert tool |
734/40 |
3/4" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/40. |
| Ratchet insert tool |
735/40 |
reversible, 3/4" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/40. |
| Hose clip pliers |
12619 |
with outside hexagon, size 19 mm, 3/8" Inside Square -drive, for use on steel spring clamps on exhaust pipe flange. |
| Bit screwdriver socket |
1421 |
for inside TORX® screws, outside Outside Hexagon 1/4" C 6,3 size T45, length 26 mm, for use on door hinges.Drive Tools:f.e. ratchet reversible No 725/4B and ratchet tap holder No 1820or ... more |
