| STAHLWILLE >> Pliers >> VDE pliers |
| Combination pliers |
6501 |
DIN ISO 5746, precision cutter for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HRC, for long life. |
| Flat nose pliers, long |
6508 |
DIN ISO 5745, long, flat serrated jaws. |
| Round nose pliers, short |
6523 |
DIN ISO 5745, for bending wire loops and rings, short, round, ground jaws, fine serrations on gripping areas. |
| Round nose pliers, long |
6524 |
DIN ISO 5745, for bending wire loops and rings, long, round, ground jaws, fine serrations on gripping areas. |
| Snipe nose pliers with cutter (radio- or telephone pliers) |
6529 |
DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HRC. |
| Snipe nose pliers with cutter (radio- or telephone pliers) |
6530 |
DIN ISO 5745, Form B, bent 45°, half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HRC. |
| Mechanics snipe nose pliers |
6533 |
half round, long tapering, serrated jaws. |
| Side cutters standard bevel |
6600 |
DIN ISO 5749, Form B, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC. |
| Heavy duty side cutters standard bevel |
6602 |
DIN ISO 5749, Form A, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC. |
| Wire stripping pliers |
6622 |
with adjustment screw to cut insulation only on wire or cable, max. 5 mm Diameter in mm 10 mm#h2# conductor cross-section. |
| Wire stripping pliers |
6623 |
for wires from 0.5 to 5 mm Diameter in mm , self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm Diameter in mm , special steel. |
| No Picture |
Replacement stripping knives (1 pair) for No 6623 |
ID10200 |
|
| Wire stripping pliers |
6624 |
for wires from 0.3 to 1.2 mm Diameter in mm , self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm Diameter in mm , special alloy steel. |
| Cable shears |
6630 |
for copper- and light alloy cables. Easy, single handed operation. Special cutter geometry to avoid pressure marks and frayed ends, adjustable joint, anti-squeeze protection, not suitable for steel- ... more |
