| STAHLWILLE >> Torque tools, torque wrench checking >> Insert tools for torque wrenches |
| QuickRelease ratchet insert tool |
725QR |
reversible, with QuickRelease safety lock. |
| Ratchet insert tool |
725/B |
reversible, with inside hexagon,1/4" or 5/16", DIN 3126/ISO 1173 D 6.3 or D8 fordirect acceptance of bits 1/4" or 5/16"outside hexagon C 6.3 (size 4: 22 teeth, size 5: 30 ... more |
| Ratchet insert tool |
725L/5 |
reversible.Caution! Modified settings on torque wrench
.This ratchet insert tool has the same extension length as ring insert tool No 732G/10
and ... more |
| Ratchet insert tool |
725/4 |
reversible. |
| Ratchet insert tools |
735 |
reversible. |
| Ratchet shell tool |
735/80 |
registered design. |
| Ratchet insert tool |
739/20 |
for Torque-Angle WrenchNo 716/R20 |
| Ratchet insert tool |
739/20H |
axially drilled pinion, locking facility for sockets.For use on Hi-Lok boltsin the aerospace industry. |
| Square drive insert tools |
734 |
|
| Square drive shell tool |
734/80 |
registered design. |
| Square drive insert tools |
734F |
with permanently attached, captive square drive. |
| Square drive insert tool |
734L/5 |
Caution! Modified settings on torque wrench
. This square-drive insert tool has the same extension length as ring insert tool No 732G/10
and ... more |
| Open ended insert tools |
731 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm |
| Open ended insert tools |
731 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm |
| Open ended insert tool |
731 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm |
| Open ended shell tools |
731 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm. |
| Open ended shell tools |
731 |
registered design.Size of Insert Tool Carrier in mm (MANOSKOP) (Outside Square) 24.5 x 28 mm |
| Ring insert tools |
732 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm |
| Ring insert tools |
732 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm |
| Ring insert tools |
732 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm |
| Ring insert tools |
732 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm |
| Ring insert tools |
732 |
Caution! Modified settings on torque wrench
.HPQ high performance steel. Ring end is chrome plated,square drive is gunmetal finish.Size of Insert Tool Carrier in mm ... more |
| Ring insert tools |
732 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mmCaution! Modified settings on torque wrench
. This insert tool has the same extension length as ... more |
| Ring insert tools |
732aG/10 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm Caution! Modified settings on torque wrench
. This insert tool has the same extension length as ... more |
| Ring insert tools |
732 |
registered designSize of Insert Tool Carrier in mm (MANOSKOP) (Outside Square) 24,5 x 28 mm |
| No Picture |
|
ID6506 |
|
| TORX® insert tools |
732TX |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm |
| TORX® insert tools |
732TX |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm |
| Open ring insert tools |
733 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm |
| Open ring insert tools |
733 |
Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm |
| Blank end insert tools |
737 |
gun finish. |
| Adaptor |
7370/10 |
for using insert tools with an outer square drive of 14 x 18 mm on torque wrenches with an internal square drive of 9 x 12 mm.Long-term loading of the adaptor is restricted to 100 N m. Caution! ... more |
| Adaptor |
7370/40 |
for using insert tools with an outer square drive of 9 x 12 mm on torque wrenches with an internal square drive of 14 x 18 mm.Long-term loading of the adaptor is restricted to 100 N m. Caution! ... more |
| Adaptor |
7370/40-1 |
for using shell tools with an internal square drive of 24.5 x 28 mm on torque wrenches with an internal square drive of 14 x 18 mm. Long-term loading of the adaptor is restricted to 650 N m. Caution! ... more |
| Shell adaptor |
7370/80 |
registered design, for attaching 14 x 18 mm insert tools.Load capacity up to 650 N m. Caution! Modified settings on torque wrench. |
