| STAHLWILLE >> Torque tools, torque wrench checking >> Electronic torque tester for torque wrenches |
| USB cable and software for No 712R, 713R |
7757+7052 |
for statistical analysis of torque readings and recording series of readings on the PC. |
| Workshop torque tester Sensotork |
7707 W |
Electronic workshop torque tester for torque wrenches, consisting of:* transducer (registered design)* holder* display unit (registered design)* tripod for display unit (with 1.5 m cable)* spiral ... more |
| Transducers |
7721-7723 |
registered design, high degree of accuracy thanks to conversion and digitalisation of readings within the transducer itself. Not susceptible to lateral forces due to low-profile construction. Within ... more |
| Display unit |
7750 |
registered design, for displaying the actual torque as measured. Units of measurement: N m, ft.lb, in.lb. Modes of operation: track, peak hold, first peak (only with manual operation), additional ... more |
| USB cable and software |
7757+7731 |
Connection between transducer and PC, for evaluating data on the PC. |
| Spiral cable |
7752 |
Connection between transducer and display unit or USB adaptor with jacks at both ends, 90° angled. |
| Mains adaptor |
7755 |
Input:230 V AC (No 7755/1)110 V AC (No 7755/2)Output: 12 V DC |
| Square drive adaptor |
7787 |
1/4" socket x 3/4" plug(6.3 x 20 mm). |
| Square drive adaptor |
7788 |
3/8" socket x 3/4" plug(10 x 20 mm). |
| Mechanical loaders |
ID4676 |
for torque wrenches, ensure uniform loading and precise application of exact forces. First peak is not displayed if display unit No 7750 is used. |
| Adaptor flange |
7785 |
for mounting transducers (quick and easy change of transducers of various sizes), complements mechanical loaders for torque wrenches No 7540-7541. |
| Testing mount |
7790-1 |
for calibrating torque screwdrivers No 760, with a swivelling steady. Can be bolted to mechanical loader for torque wrenches No 7540N and No 7541. |
| Complete calibrating system |
7706-6PC |
0,2 - 10 N m |
| Complete calibrating system |
7706-7PC |
2 - 100 N m |
