| STAHLWILLE >> Sockets, accessories and socket sets for manual use >> Drive tools and accessories 1/2" |
| Square drive |
502 1/2 |
for No 720/20; 734/20. |
| Ratchet |
512 |
reversible (36 teeth),DIN 3122/ISO 3315. |
| QuickRelease ratchet |
512QR |
reversible (36 teeth),with QuickRelease safetylocks and 2-componenthandles, DIN 3122/ISO 3315. |
| QuickRelease ratchet |
512SG-QR |
reversible (36 teeth), withQuickRelease safetylocks and steel handle, DIN 3122/ISO 3315. |
| Ratchet, fine tooth |
515 |
reversible (60 teeth),for use in confined spaces,re-engages after movement of 6°,DIN 3122/ISO 3315. |
| Flexible joint ratchet |
517 |
reversible (60 teeth),handle may be raised or lowered by approx. 90°. Lockable in following positions: straight, 30° up,60° up, 30° down. Unlocked by depressing button in handle, ... more |
| RATCHFIX ratchet |
520* |
reversing lever near handle(36 teeth),DIN 3122/ISO 3315. |
| Ratchet adaptor |
522 |
reversible (20 teeth). |
| Ratchet |
532 |
long handle, reversible(36 teeth). |
| Speeder brace |
501 |
working radius 105 mm,DIN 3122/ISO 3315. |
| Flexible handle |
504 |
DIN 3122/ISO 3315. |
| Sliding T-handle |
506 |
DIN 3122/ISO 3315. |
| QuickRelease sliding T-handle |
506QR |
with QuickRelease safety locks. |
| Extensions |
509 |
DIN 3123/ISO 3316. |
| Extensions with wobble-drive |
ID3638 |
swivel angle 15°each side, maximum torque 200 N m. |
|
| QuickRelease universal joint |
510QR |
DIN 3123/ISO 3316, with QuickRelease safety locks. |
| Adaptor |
513 |
1/2" socket x 3/8" plug(12.5 x 10),maximum torque 202 N m,DIN 3123/ISO 3316,HPQ high performance steel. |
| Adaptor |
514 |
1/2" socket x 3/4" plug(12.5 x 20),DIN 3123/ISO 3316,HPQ high performance steel. |
| Adaptor |
7789-1 |
1/2" socket x 1" plug(12,5 x 25 mm),HPQ high performance steel. |
| Set adaptors, 3 pieces |
409M/432M/514M/3 |
1/4" socket x 3/8" plug,3/8" socket x 1/2" plug,1/2" socket x 3/4" plug. |
| Adaptor |
514M |
1/2" socket x 3/4" plug(12.5 x 20 mm). |
| Bit holder |
543 |
Socket, hexagon 5/16" inside hexagon, DIN 3126 form D 8/ISO 1173 form D 8. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position ... more |
